某半導體行業廢水處理工程
該企業車間產生廢水大致可分為一般酸洗廢水、切割研磨廢水、電鍍含銅廢水和其他濃液,其中濃液的水量較小,可由桶槽獨立收集后委外處理。本工程針對一般酸洗廢水、切割研磨廢水和電鍍含銅廢水進行設計處理。
廢水名稱 Wastewater types | 一般酸洗廢水 Acid cleaning wastewater | 切割研磨廢水 Abrasion wastewater | 電鍍含銅廢水 Cu wastewater |
水量(m3/d) Discharge | 800 | 640 | 72 |
廢水排放標準 Emissions Standards | 《污水綜合排放標準》GB8978-1996中三級標準 Integrated wastewater discharge Standard > the third standard | 《電鍍污染物排放標準》GB21900-2008中表三要求 < Emission standard of pollutants for electroplating > Schedule III | |
流程圖?
案例圖片

